Automotive Electrical/Electronic System Technician
Course Code: AER0360V
Credit Hours: 300 clock hours
Effective beginning: Fall 2020
Course Description:This course prepares the student to test, diagnose, and repair starting, charging, lighting, and associated electrical systems. Electrical measurement and circuit tracing are stressed, along with an introduction to the operation of basic components associated with electrical and electronic systems. Components include lecture/discussion, written assignments, and hands-on experience.
John Gardner, Workforce Development Building “WD”, Room 134, Telephone 718-2306, Fax 718-2304. College extension 2306. Office hours as posted. ASE Master Certified & A.S. degree Automotive Technology
Required textbooks/ course materials:
Automotive Service Inspection, Maintenance, Repair, Fifth Edition, Tim Gilles, Thompson Delmar, ISBN 10-1-305-71537-3
Modern Automotive Technology Shop Manual, Chris Johanson, Goodheart-Wilcox,
Guide to the Automotive Certification Examination - James G. Hughes (Recommended)
Lab Manual: Degem Systems (Provided)
Automotive Tutorials and Modules (Provided)
See your Instructor First Day Handout for individual instructor assignment schedule.
Discipline-level learning outcomes:
Automotive Technology focuses on broad, transferable skills and stresses understanding and demonstration of the following elements of the automotive industry:
See chart below.
|Course-level student learning outcomes||Discipline-level learning outcomes||Assessment methods|
Perform voltage and pulse measurement, and engine control system diagnosis utilizing scan tools, D.V.O.M. and lab scope.
Perform engine control system diagnosis utilizing the latest industry standard equipment.
Identify exhaust restrictions, fuel delivery problems, ignition malfunctions, and determine the mechanical condition of an engine by utilizing an engine analyzer in conjunction with dynamometer load testing.
Perform exhaust emissions testing utilizing a 5-gas analyzer; diagnose and repair performance problems caused by improper operation of a catalytic converter.
Diagnose selected drivability problems with multiple malfunctions, utilizing appropriate test equipment within a designated time limit. Perform routine service and periodic maintenance on electronic fuel injected vehicles.
Perform flow testing and cleaning procedures on fuel injected vehicles.
Utilize self-diagnosis to correctly diagnose malfunctioning circuits or components.
Measure injector and cylinder head temperature, resistances, and perform air flow meter tests.
Diagnose and repair malfunctioning electrical circuits and components on EFI and PFI vehicles; perform i/o system voltage checks
Identify all components used in the vehicles fail-safe (limp-home) mode. Start and run a vehicle with all fail-safe components disconnected.
Utilize a systematic approach to troubleshooting fuel injection problems.
Diagnose and repair malfunctioning emissions systems.
Identify all current ignition systems.
Demonstrate knowledge of the operation of the crank angle sensor, power transistor, and ignition pulse signal in an ECU controlled ignition.
Install a distributor, and time a vehicle with an electronic ignition system in which the timing marks have been misaligned.
Perform a battery cranking, coil cranking, and coil run voltage test on a vehicle. 17. Perform coil primary and secondary, and secondary wire resistance tests. 18. Inspect a fuel evaporative emission and a crankcase ventilation control system.
Examine spark plug condition to determine common engine operating conditions.
Demonstrate a knowledge of the operation of the dual ignition systems, and the D.I.S. ignition systems.
Perform an idle speed/ignition timing/idle mixture ratio inspection on a vehicle.
Adjust an automotive oscilloscope for inspection of primary and secondary ignition patterns; analyze primary and secondary ignition patterns to diagnose faults in an automotive ignition system.
AUT Outcome 1: Demonstrate mastery of Automotive Service Technology knowledge and skills.
AUT Outcome 2: Demonstrate safety skills appropriate for employees in an Automotive Service work setting.
AUT Outcome 3: Apply critical thinking and diagnostic skills as appropriate for Automotive Service Technicians.
AUT Outcome 4: Exhibit interpersonal and ethical skills as appropriate for Automotive Service Technicians.
AUT Outcome 5: Exhibit leadership, organizational, and professional skills appropriate for Automotive Service Technicians.
AUT Outcome 6: Students exhibit employability and/or entrepreneurship skills as appropriate for in an Automotive Service work setting.
Tests, Quizzes, Final Exams, Skills Performance and Skills Demonstration, Projects, Skills Check
The course is competency-based and self-paced using handouts, videotapes, textbooks, computer-assisted instruction and instructor demonstrations.
- Attending classes, completing book and computer assignments along with laboratory work.
- Completing reading and homework assignments.
- Studying/maintaining handouts.
- Reading current publications from the automotive industry.
Student must demonstrate an understanding theory of operating principles prior to stating lab sheets. Have the instructor or lab assistant sign and verify your lab sheets after completing each lab assignment. Turn in your lab sheets to the instructor or lab assistant for grading and recording.
You will be assigned a specific lab station work area. The equipment you will use is rugged and reliable. However, with abuse or misuse, it will malfunction and become inoperable. Be careful and have the instructor/instructional aide demonstrate the use of the equipment before using it for the first time. Read all instructions carefully and ask questions prior to use. Keep your lab bench work area clean and orderly while performing assignments. Return all equipment/lab components to the proper storage area before departing at the end of the day. Lab and shop will be clean and secured at the end of each project or day whichever comes first. If a lab assignment will take more than one day notify the instructor and secure all parts and project at the end of the day.
The course examinations consist of written knowledge examinations and performance evaluations. A knowledge examination is given upon completion of each assignment on the course outline. If you take an exam and score less than 70%, you are allowed to retake the exam on the next class day. First, restudy your textbook, quizzes, lab experiments, etc. and make another attempt. If you have taken the exam three or more times to pass, your grade can never be more than 60. Performance evaluation must be mastered before proceeding to the next assignment. Student will be able to repeat performance evaluations till complete mastery is achieved. Students are encouraged to take the nationally and industry recognized Automotive Service Excellence (ASE) exam upon completion of each automotive area.
College-wide policies and resources
For more specific information on Chipola's college-wide academic policies and resources available to students, visit the link below.